Sony MSW-900 Operation Manual page 56

1 TALLY indicator
Setting the TALLY switch to HIGH or LOW activates this indicator. The
indicator lights during recording on the VTR. It also provides the same
2
information as the REC indicator in the viewfinder; it lights up during
recording and flashes to indicate a problem. The brightness of this
indicator when it is lit can be controlled by the TALLY switch.
2 DISPLAY switch
This switch the indications on the viewfinder screen on or off.
ON: The indications appear on the viewfinder screen.
OFF: The indications do not appear on the viewfinder screen.
Note
When you turn the MENU ON/OFF switch to ON, the menu will appear
on the viewfinder screen even if the DISPLAY switch is set to OFF.
3 TALLY switch
This switch controls the TALLY indicator, setting its brightness (HIGH
or LOW) or turning it off.
HIGH: The TALLY indicator gets brighter.
OFF: The TALLY indicator does not operate.
LOW: The TALLY indicator gets dimmer.
4 BACK TALLY indicator
This indicator is identical to the TALLY indicator 1 when the BACK
TALLY switch 5 is set to ON.
5 BACK TALLY switch
This switch turns the BACK TALLY and the REAR TALLY indicators
on and off.
ON: Switches on the BACK TALLY and REAR TALLY indicators.
OFF: Switches off the BACK TALLY and REAR TALLY indicators.
2-40
Chapter 2 Locations and Functions of Parts and Controls