3 POWER switch
This switch turns the main power supply on and off.
2
4 LIGHT switch
This switch selects the way in which a video light connected to the
LIGHT connector is switched on and off.
AUTO: The video light is automatically turned on, when starting
recording with the VTR starts, since a DC 12V signal is output from
the LIGHT connector during recording. When recording in Interval
Rec mode with the MSDW-903 (not supplied), the light is
automatically turned on before the start of recording since a DC 12V
signal can be automatically output before a frame picture is shot.
MANUAL: A DC 12V signal is always output from the LIGHT
connector. Whether the light is on or off is based on the position of
the ON/OFF switch of the light itself.
2-2
Chapter 2 Locations and Functions of Parts and Controls