Sony MSW-900 Operation Manual page 124

2
Turn the MENU knob to move the t mark to EE OUTPUT
DELAY, then push the MENU knob.
The t mark to the left of EE OUTPUT DELAY changes to the z
mark and the z mark to the left of the setting changes to the ? mark.
Item
SYNC
VIDEO
a) Since the V sync signal is output with delay of 8 horizontal
lines, any external equipment connected after the second one are
not synchronized with the camcorder when interconnecting
multiple camcorders for recording.
Contents
Outputs the video signals including the V sync signal,
which are delayed by 8 horizontal lines against the input
signals to the GENLOCK IN connector, from the TEST
OUT connector or the VIDEO OUT connector. The
pictures are displayed at the correct position on the video
monitor. a)
Outputs the video signals, excluding the V sync signal,
with delayed by 8 horizontal lines against the input
signals to the GENLOCK IN connector, from the TEST
OUT connector or the VIDEO OUT connector. The V
sync signal is the same as the V sync signal input to the
GENLOCK IN connector. On the video monitor, pictures
are displayed lowered by 8 horizontal lines.
Chapter 3 Recording and Playback
b)
(Continued)
3-61
3