Sony MSW-900 Operation Manual page 236

c) Even if RETURN VIDEO is set to OFF on the GENLOCK page
of the MAINTENANCE menu, you can use this switch to
display the image of the return video signal on the viewfinder.
Functions to be assigned to the ASSIGN 2 (slide-type) switch
Function
OFF
LOOP REC ON/OFF
4
TEST OUT CHARACTER Assigns the function to switch whether or
MARKER ON/OFF
REC VIDEO SOURCE
a) When the MSDW-903 is not installed, this item does not appear
since this function is not effective.
b) Even when MARKER is set to OFF on the MARKER page of
the USER menu, the ASSIGN 2 switch allows you to display or
not to display all markers.
c) When the MSDW-904 is not installed, this item does not
appears since this function is not effective.
Note
For functions that are assigned to the ASSIGN 2 switch, you cannot
change those settings using other menus. The function assigned to
ASSIGN 2 switch takes precedence over the menu setting.
4-110
Chapter 4 Adjustments and Settings for Recording
Content
Disables the switch.
a) Assigns the Loop Rec mode ON or OFF
function.
not the characters are mixed to the video
signal to be output from the TEST OUT
connector.
Assigns the ON/OFF function to display all
markers. b)
c) Selects which signals you will record
pictures being shot by the camcorder or
video signals from external equipment
connected to GENLOCK IN connector.
(Continued)