Sony MSW-900 Operation Manual page 11

• Fine adjustment of the reference value for automatic iris control is
provided.
• A built-in circuit produces a color bar signal for easy adjustment of the
color monitor. An SNG
purposes.
• A super-cardioid directional microphone with an external power supply
system is supplied. Other types of microphones can also be connected.
• You can reverse the picture orientation depending on the cinema lens
adaptor attached between the camcorder and the cinema lens.
• By connecting the BVF-VC10W Color Viewfinder (not supplied), you
can check both the camera image and a playback image in color.
• The RM-B150 Remote Control Unit (8 pin, not supplied) controls
some of the camera functions and the VTR functions.
• By connecting a CA-701 Camera Adaptor (not supplied), you can input
CH-3 and CH-4 audio signals and output SDI
• By connecting a CA-702/702P Camera Adaptor (not supplied), the
camcorder can be connected to a portable VTR with a CCZ (26 pin)
cable, allowing you to record external analog video signals or SDI
signals (including an embedded audio signal).
• Attaching a MSDW-902 extension board (not supplied) allows you to
output an SDI signal (corresponding to EDH
OUTPUT connector. A menu is used to select either composite video
signal output or SDI signal output.
• The camcorder has ASSIGN 1/2 switches, to which you can assign
various functions.
....................................................................................................................................
1) SNG: Satellite News Gathering
2) SDI: Serial Digital Interface
3) EDH: Error Detection and Handling
1)
bar signal is also provided for SNG uplink
2) signals.
3) ) from the VIDEO
Chapter 1 Overview
1
1-3