Sony MSW-900 Operation Manual page 33

6 TALLY switch
This switch controls the TALLY indicator, setting its brightness (HIGH
or LOW) or turning it off.
HIGH: The TALLY indicator gets brighter.
OFF: The TALLY indicator does not operate.
LOW: The TALLY indicator gets dimmer.
7 Viewfinder
The viewfinder lets you to view the camera image in black and white
while shooting the picture and also see the playback picture from the
VTR. It also displays various warnings and messages related to the
settings or operating conditions of the camcorder, a zebra pattern, safety
zone marker 1) , and center marker
8 Diopter adjustment ring
Use this ring to adjust the viewfinder image for your vision.
9 Viewfinder front-rear positioning lever
Use this lever to move the viewfinder forward or backward.
0 Viewfinder left-right positioning ring
Use this ring to move the viewfinder sideways.
....................................................................................................................................
1) Safety zone marker
The safety zone marker is a rectangle indicating the effective picture area.
For more information, see "4-7-4 Setting the Marker Display" on page 4-74.
2) Center marker
The center marker indicates the center of the picture with a crosshair.
2) .
Chapter 2 Locations and Functions of Parts and Controls
2
2-17