Sony MSW-900 Operation Manual page 308

2
Mount the tuner on the WRR tuner fitting.
5
3
Connect the tuner power cord to the DC OUT connector of the
camcorder, and the audio output cable to the AUDIO IN CH-1 or
CH-2 connector.
AUDIO IN CH-1/CH-2 switches: When the
XLR connection automatic detection
function is set to OFF on the VTR MODE 1
page of the MAINTENANCE menu, set
the AUDIO IN CH-1 or CH-2 switch for the
channel to which the audio output cable
is connected to REAR.
5-28
Chapter 5 Setting Up the Camcorder
WRR-860A
Set the LINE/MIC/
+48 V ON switch
for the channel to
which the audio
out cable is
attached to MIC.
AUDIO IN for
DC OUT
CH-1 or CH-2