Sony MSW-900 Operation Manual page 50

• This connector also inputs the external analog composite video signal
when the MSDW-904 extension board (not supplied) is installed. You
can record the external analog composite video signal input to this
2
connector.
For details, see "3-5 Recording Video Signals from External Equipment (When
Using the MSDW-904)" on page 3-55.
2 TC IN (time code input) connector (BNC type)
To synchronize the time code with an external time code, connect the
reference time code input here.
3 TC OUT (time code output) connector (BNC type)
To synchronize the time code of an external VTR with that of the
camcorder, connect this connector to the time code input lock connector
of the external VTR.
2-34
Chapter 2 Locations and Functions of Parts and Controls