Sony MSW-900 Operation Manual page 133

2
Adjust the FILTER selector to suit the lighting conditions.
FILTER knob
(inner) setting
1
2
3
4
If the setting of the FILTER selector is changed, a message reporting
the setting appears for about 3 seconds in the setting change and
adjustment progress message display area of the viewfinder screen
(in display mode 3).
3
Place a white test card under the same lighting conditions as the
subject to be shot and zoom up to it. Alternately, any white object
such as a cloth or a wall could be used.
The absolute minimum white area is as follows:
Note
Make sure there are not bright spots in the rectangle.
ND filter FILTER knob
(outer) setting
Clear
1/4 ND
1/16 ND
1/64 ND
Chapter 4 Adjustments and Settings for Recording
CC filter
A Cross filter
B 3200K
C 4300K
D 6300K
Rectangle centered on the
screen. The lengths of the
sides are 70% of the length
or the width of the screen.
The white object must be
within the rectangle and
have an area of at least
10% of the screen.
4
(Continued)
4-7