The current setting of an item appears to the right of the item.
You can select displaying or not-displaying for the following item.
Item
MARKER
CENTER
SAFETY ZONE
SAFETY AREA
ASPECT
ASPECT SELECT
ASPECT MASK
ASPECT MASK LVL
100 % MARKER
Contents
Not to display all markers, set to OFF.
To display the center marker, set to ON.
To display the safety zone, set to ON.
To select the safety zone range (80%, 90%,
92.5 % or 95 %), when SAFETY ZONE is set
to ON.
To display the aspect marker, set to ON.
To select the type of the aspect marker.
To make the areas out of the selected aspect
marker dimmer, set to ON.
To set the mask level (1/2, 1/4 or 1/8), when
the ASPECT MASK is set to ON.
To display the effective pixel area, set to ON.
Chapter 4 Adjustments and Settings for Recording
4
(Continued)
4-75