Sony MSW-900 Operation Manual page 122

7
Push the MENU knob.
The z mark to the left of the selected item changes to the t mark
and the ? mark to the left of the setting changes to the z mark.
8
To end menu operations, set the MENU ON/OFF switch to OFF.
The menu disappears from the viewfinder screen, and the display
indicating the current status of the camcorder appears along the top
and bottom of the viewfinder screen.
While recording in EXT mode, EXT is displayed along the top of the
viewfinder screen.
Notes
• Even when EXT is selected as the REC VIDEO SOURCE, if the
external video signal is not input to the GENLOCK IN connector, the
camcorder does not change to EXT mode, and the pictures being shot
by the camcorder are recorded on the tape.
• Even if GENLOCK ON/OFF is set to OFF on the GENLOCK page of
the MAINTENANCE menu, the camcorder is automatically
synchronized with the external reference video signal when the
external video signal is input to the GENLOCK IN connector in EXT
mode. When the setting is switched to CAM mode, or when no signals
are input to the GENLOCK IN connector even in EXT mode, the
camcorder is reset to the original setting.
Chapter 3 Recording and Playback
3
3-59