Sony MSW-900 Operation Manual page 37

qf SHUTTER selector
Set this selector to ON to use the electronic shutter. Set it to SEL to
switch the shutter speed or mode setting within the range that has been
previously set from the setup menu.
When this selector is adjusted, the new setting will be indicated on the
setting change/adjustment progress message display area for about 3
seconds.
For more information about the shutter speed and mode settings, see "4-2 Setting
the Electronic Shutter" on page 4-12.
qg AUTO W/B BAL (automatic white/black balance adjustment)
switch
This switch activates the white balance and black balance automatic
adjustment functions.
WHT: Automatic adjustment of the white balance. If the WHITE BAL
switch is set to A or B, the white balance setting is stored in the
corresponding memory. The memory can store the white balance
setting for each CC filter.
BLK: Automatic adjustment of the black set and black balance.
qh ASSIGN (assignable) switches 1/2
You can assign the desired functions to each of ASSIGN 1 switch (push-
type) and ASSIGN 2 switch (slide-type) on the FUNCTION 1 page of
the USER menu.
For details, see "4-8-5 Assigning Functions to ASSIGN 1/2 Switches" on page 4-
107.
qj GAIN selector
This selector switches the gain of the video amplifier to match the
lighting conditions during shooting. The gains corresponding to the L,
M, and H settings are selected from the setup menu before use. The
factory settings are L = 0 dB, M = 9 dB, and H = 18 dB.
When this selector is adjusted, the new setting will be indicated on the
Chapter 2 Locations and Functions of Parts and Controls
2
2-21