Table of Contents
Advertisement
Installing a Remote
Battery Disconnect
Installation Procedures
4.1
The remote battery disconnect is crated separately for shipping. The enclosure is
designed to be free-standing, You can install a remote battery disconnect
anywhere between the remote DC supply and the UPS, according to national and
local codes. Figure 4---1 shows a typical remote battery disconnect enclosure.
The remote battery disconnect is set in accordance with the operation procedures
contained in Chapter 12 --- UPS Operating Instructions of this manual. When
service personnel are performing maintenance on the UPS or battery string, the
disconnect should be set to the OFF position.
Operating Handle
ON Position
Figure 4 ---1. Remote Battery Disconnect Enclosure
Powerware 9315 (500 kVA- -750 kVA) Installation and Operation
164201244 REV. D 030101
4
Operating Handle
OFF Position
4--1
Advertisement
Table of Contents
