Customer Convenience Outlet; Installation Features; Options And Accessories; 5% Input Filter - Powerware Uninterruptible Power Supply Installation And Operation Manual

Uninterruptible power supply 500 kva -- 750 kva
Table of Contents

Advertisement

10.2.6

Customer Convenience Outlet

An uninterruptible 120VAC, 0.2 amp, fuse-protected convenience outlet is provided
to supply power to the optional modem. It is located on the Customer Interface
Panel.
10.2.7

Installation Features

Power wiring can be routed through the top of each cabinet. External sensing
and monitoring control wire must be installed in accordance with Class 2 wiring
methods. Class 2 wiring can be routed through the top of each cabinet.

10.3 Options and Accessories

Contact your sales representative for information about any of these available
options:
10.3.1

5% Input Filter

Your unit may be equipped with an input filter. An input filter yields power factor
correction that allows you to save on your initial installation and operating costs.
The filter also reduces input harmonic current distortion and minimizes upstream
interference that can damage sensitive hardware components.
10.3.2

Battery

You can enhance the protection provided by your UPS with one or more backup
battery supplies equipped with sealed lead-acid, maintenance-free batteries.
10.3.3

External Fused Battery Disconnect

An optional DC disconnect, enclosed in a freestanding cabinet, provides an
automatic or manual means of disconnecting batteries that are located remotely
from the UPS. This option is described further in Chapter 13, "Using Features and
Options."
10.3.4

Upgrade Capability

The UPS is available in various output power ratings in both 50 and 60 Hz models.
If your power requirements increase, you can upgrade your UPS system to provide
more output power with a minimum impact on your facility.
10.3.5

Remote Monitor Panel

An optional Remote Monitor Panel (RMP) contains backlit status indicators and a
local horn, allowing you to monitor the operational status and alarm condition of
the UPS from virtually any location within your facility. You can install multiple
RMPs at remote locations to increase your monitoring capabilities. This option is
described further in Chapter 13, "Using Features and Options."
10--4
Powerware 9315 (500 kVA- -750 kVA) Installation and Operation
164201244 REV. D 030101

Advertisement

Table of Contents
loading

This manual is also suitable for:

9315

Table of Contents