For More Information; Getting Help - Powerware Uninterruptible Power Supply Installation And Operation Manual

For More Information

This manual describes how to install and operate your UPS system. For more
information about the installation and operation of the Powerware Hot Sync ---
Capacity system, refer to the following:
164201150
Contact your local Powerware Field Service office for information on how to obtain
copies of this manual.

Getting Help

If you need to schedule initial startup, need regional locations and telephone numbers,
have a question about any of the information in this manual, or have a question this
manual does not answer, please call Powerware Corporation at:
United States
Canada
Outside the U.S.
Powerware 9315 (500 kVA- -750 kVA) Installation and Operation
164201244 REV. D 030101

Powerware Parallel Capacity/Redundant System Installation
and Operation
Provides installation instructions for the System Bypass Module
(SBM) cabinet, and optional components and accessories. Site
preparation, planning for installation, and wiring and safety
information are supplied. Detailed illustrations of cabinet and
optional accessories, including dimensional and connection point
drawings are provided.
Describes the SBM Control Panel and explains the functions of
the SBM; discusses the standard features of the SBM and
optional accessories; provides procedures for starting and
stopping the parallel for capacity redundancy system, and
information about maintenance and responding to system events.
Also described are the RS---485 and RS---232 serial
communications capabilities of the SBM; discusses the two
communications ports on the Customer Interface Panel inside the
SBM and how to connect optional remote accessories to your
SBM; provides information about enabling, disabling, and
customizing building alarms.
1-800-843-9433
1-800-461-9166
Call your local representative
xv