Table of Contents
Advertisement
4.
Connect RIM wiring to the terminal block using the terminations shown in
Table 7---1.
From RIM A
From RIM B (if used)
5.
Contact your local field service office for verification and testing of the RIM
and its connections prior to making connections to J1---J4.
You can order interface cables separately for connecting to the 15-Pin D-Sub
Connectors.
6.
Repeat steps 1 through 5 for each RIM you are installing.
7.
If you are installing an RMP or SCM in addition to an RIM, proceed to Chapter
6 or 8, respectively; otherwise, secure the UPS cabinet by reversing the steps
contained in paragraph 2.2.6.
Powerware 9315 (500 kVA- -750 kVA) Installation and Operation
164201244 REV. D 030101
Table 7---1. RIM Wire Terminations
TB1---4
TB1---5
TB1---6
TB1---7
TB1---4
TB1---5
TB1---6
TB1---7
To UPS
TB3---1
TWISTED WIRES (4)
TWISTED WIRES (4)
TB3---2
1---2 TURNS PER
1 2 TURNS PER
TB3---3
TB3---4
To UPS
TB3---5
TWISTED WIRES (4)
TWISTED WIRES (4)
TB3---6
1 2 TURNS PER
1---2 TURNS PER
TB3---7
TB3---8
Remarks
3 INCHES
Remarks
3 INCHES
7--3
Advertisement
Table of Contents
