Add/Edit A User Access Control Rule - ZyXEL Communications SBG3500-N000 User Manual

Chapter 17 User Access Control
Table 79 Security > User Access Control (continued)
LABEL
Website Block
Modify
Apply
Cancel

17.2.1 Add/Edit a User Access Control Rule

Click Add new profile in the User Access Control screen to add a new rule or click the Edit icon
next to an existing rule to edit it. Use this screen to configure a restricted access schedule and/or
URL filtering settings to block the users on your network from accessing certain web sites.
Figure 106 User Access Control Rule: Add/Edit
The following table describes the fields in this screen.
Table 80 User Access Control Rule: Add/Edit
LABEL
General
Active
User Access
Control Profile
Name
246
DESCRIPTION
This shows whether the website block is configured. If not, None will be shown.
Click the Edit icon to go to the screen where you can edit the rule.
Click the Delete icon to delete an existing rule.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
DESCRIPTION
Select the checkbox to activate this User Access control rule.
Enter a descriptive name for the rule.
SBG3500-N000 User's Guide