The Radius Screen - ZyXEL Communications SBG3500-N000 User Manual

The following table describes the labels in this screen.
Table 91 VPN > IPSec VPN > Monitor
LABEL
Radio Buttons
Name
Status
Application Scenario
Remote Gateway
Address
Local Gateway
Address
Connect
Disconnect

20.6 The Radius Screen

Use the Radius screen to manage the list of RADIUS servers the SBG3500-N can use in
authenticating users. In the Web Configurator, click VPN > IPSec VPN > Radius.
Figure 121 VPN > IPSec VPN > Radius
The following table describes the labels in this screen.
Table 92 VPN > IPSec VPN > Radius
LABEL
Radius Setup
Server Address
Authentication Port
Backup Server
Address
Backup
Authentication Port
SBG3500-N000 User's Guide
DESCRIPTION
Click the radio button to choose the VPN client you want to connect or disconnect.
This field displays the identification name for this IPSec VPN policy.
This field displays whether the IPSec VPN connection is up (yellow bulb) or down (gray
bulb).
This field displays the encryption algorithm used for an SA.
This is the WAN IP address of the remote IPSec Gateway device.
This is the WAN IP address of the local IPSec Gateway device.
Click this to connect.
Click this to disconnect.
DESCRIPTION
Enter the address of the RADIUS server.
Specify the port number on the RADIUS server to which the SBG3500-N sends
authentication requests. Enter a number between 1 and 65535.
If the RADIUS server has a backup server, enter its address here.
Specify the port number on the RADIUS server to which the SBG3500-N sends
authentication requests. Enter a number between 1 and 65535.
Chapter 20 IPSec VPN
267