The Multi-Wan Screen - ZyXEL Communications SBG3500-N000 User Manual

Chapter 6 Broadband

6.7 The multi-WAN Screen

Use the multi-WAN screen to configure the multiple WAN load-balance and fail-over rules to
distribute traffic among different interfaces. This helps to increase overall network throughput and
reliability. Load-balancing divides traffic loads between multiple interfaces. This allows you to
improve quality of service and maximize bandwidth utilization for multiple ISP links.
You can only configure one rule for each interface. Click Network Setting > Broadband > multi-
WAN to display the following screen.
Figure 32 Network Setting > Broadband > multi-WAN
The following table describes the labels in this screen.
Table 17 Network Setting > Network Setting > multi-WAN
LABEL
Add New Entry
#
Interface
Mode
Weight
Modify
124
DESCRIPTION
Click this button to add a previously removed multi-WAN rule entry. By default, adding new
WAN interfaces to the system will generate a corresponding rule entry on this page in active
mode with a weight of 1. Each interface can have only one rule. If the interface you want to
configure already has a rule, you can edit it, or you can delete it before configuring a new
rule.
This is the index number of the entry.
This is the interface that uses the rule.
This shows whether the rule is Active or Passive.
This shows the weight of the rule.
Click the Edit icon to configure the multi-WAN rule.
Click the Delete icon to remove the multi-WAN rule.
SBG3500-N000 User's Guide