ZyXEL Communications SBG3500-N000 User Manual page 304

Chapter 30 Remote Management
The following table describes the fields in this screen.
Table 116 Maintenance > Remote MGMT
LABEL
Trust Domain
Status
IP Address
Add
Delete
Edit
Services
LAN/WLAN
WAN
Trust Domain
Port
Certificate
HTTPS
Certificate
Apply
Cancel
304
DESCRIPTION
This field displays whether the Trust Domain is active or not.
Enter the Trust Domain IP address.
Click Add to add an IP address which the computer is allowed to access and manage the the
SBG3500-N.
Click Delete to remove an IP address which the computer is not allowed to access and
manage the the SBG3500-N.
Click Edit to make changes to the IP addresses which the computer is allowed to access and
manage the the SBG3500-N.
This is the service you may use to access the SBG3500-N.
Select the Enable check box for the corresponding services that you want to allow access to
the SBG3500-N from the LAN/WLAN.
Select the Enable check box for the corresponding services that you want to allow access to
the SBG3500-N from the WAN.
Select the Enable check box for the corresponding services that you want to allow access to
the SBG3500-N from the Trust Domain.
You may change the server port number for a service if needed, however you must use the
same port number in order to use that service for remote management.
Select a certificate the HTTPS server (the SBG3500-N) uses to authenticate itself to the
HTTPS client. You must have certificates already configured in the Certificates screen.
Click Apply to save your changes back to the SBG3500-N.
Click Cancel to restore your previously saved settings.
SBG3500-N000 User's Guide