The Dynamic Dns Screen - ZyXEL Communications SBG3500-N000 User Manual

Chapter 12 Dynamic DNS Setup
The following table describes the labels in this screen.
Table 66 DNS Entry: Add/Edit
LABEL
FQDN
IP Address
Apply
Cancel

12.3 The Dynamic DNS Screen

Use this screen to change your Device's DDNS. Click Network Setting > DNS > Dynamic DNS.
The screen appears as shown.
Figure 91 Network Setting > DNS > Dynamic DNS
The following table describes the fields in this screen.
Table 67 Network Setting > DNS > > Dynamic DNS
LABEL
Dynamic DNS
Service
Provider
Hostname
Username
Password
Email
Key
Apply
Cancel
224
DESCRIPTION
Enter the Fully Qualified Domain Name (FQDN) of the DNS entry. For example, if your
hostname is myhost and a parent domain name is example.com, then your FQDN is
myhost.example.com.
Enter the IP address of the DNS entry.
Click Apply to save your changes.
Click Cancel to exit this screen without saving.
DESCRIPTION
Select Enable to use dynamic DNS.
Select your Dynamic DNS service provider from the drop-down list box.
Type the domain name assigned to your Device by your Dynamic DNS provider.
You can specify up to two host names in the field separated by a comma (",").
Type your user name.
Type the password assigned to you.
If you select TZO in the Service Provider field, enter the user name you used to register
for this service.
If you select TZO in the Service Provider field, enter the password you used to register for
this service.
Click Apply to save your changes.
Click Cancel to exit this screen without saving.
SBG3500-N000 User's Guide