Table of Contents
Advertisement
Chapter 13 Interface Group
The following table describes the fields in this screen.
Table 69 Interface Group Configuration
LABEL
Group Name
802.1p
802.1q
VLAN Port Membership
Port
Member
Tagged
#
Filter Criteria
WildCard
Support
Remove
Apply
Cancel
228
DESCRIPTION
Enter a name to identify this group. You can enter up to 30 characters. You can use letters,
numbers, hyphens (-) and underscores (_). Spaces are not allowed.
IEEE 802.1p defines up to 8 separate traffic types by inserting a tag into a MAC-layer frame
that contains bits to define class of service.
Select the IEEE 802.1p priority level (from 0 to 7) to add to traffic through this connection.
The greater the number, the higher the priority level.
Type the VLAN ID number (from 0 to 4094) for traffic through this connection.
This is the available LAN interface (Ethernet LAN or Wireless LAN) that can be selected to
form a VLAN interface group.
Click the check box to select the LAN port as a member of the VLAN interface group.
Click the check box to set the port to tag or not to tag all outgoing traffic with the VLAN ID.
This shows the index number of the rule.
This shows the filtering criteria. The LAN interface on which the matched traffic is received
will belong to this group automatically.
This shows if wildcard on DHCP option 60 is enabled.
Click the Remove icon to delete this rule from the Device.
Click Apply to save your changes back to the Device.
Click Cancel to exit this screen without saving.
SBG3500-N000 User's Guide
Advertisement
Table of Contents
Troubleshooting
