Table of Contents
Advertisement
Traffic Policing
Traffic policing is the limiting of the input or output transmission rate of a class of traffic on the
basis of user-defined criteria. Traffic policing methods measure traffic flows against user-defined
criteria and identify it as either conforming, exceeding or violating the criteria.
Traffic Rate
(Before Traffic Policing)
The Device supports three incoming traffic metering algorithms: Token Bucket Filter (TBF), Single
Rate Two Color Maker (srTCM), and Two Rate Two Color Marker (trTCM). You can specify actions
which are performed on the colored packets. See
each metering algorithm.
10.3 The Quality of Service General Screen
Click Network Setting > QoS > General to open the screen as shown next.
Use this screen to enable or disable QoS and set the upstream bandwidth. See
page 189
for more information.
Figure 66 Network Settings > QoS > General
SBG3500-N000 User's Guide
Time
Chapter 10 Quality of Service (QoS)
Traffic Rate
Time
(After Traffic Policing)
Section 10.8 on page 202
for more information on
Section 10.1 on
191
Advertisement
Table of Contents
Troubleshooting
