Table of Contents
Advertisement
Chapter 9 Routing
Table 40 Network Setting > Routing >Policy Forwarding (continued)
LABEL
Policy Name
Source IP
Source Subnet
Mask
Protocol
Source Port
Source MAC
Destination IP
Destination
Subnet Mask
Destination
Port
Destination
MAC
WAN
Modify
9.3.1 Add/Edit Policy Forwarding
Click Add new Policy Forward Rule in the Policy Forwarding screen or click the Edit icon next
to a policy. Use this screen to configure the required information for a policy route.
Figure 64 Policy Forwarding: Add/Edit
The following table describes the labels in this screen.
Table 41 Policy Forwarding: Add/Edit (Sheet 1 of 2)
LABEL
Policy Name
Source IP
186
DESCRIPTION
This is the name of the rule.
This is the source IP address.
This is the source subnet mask address.
This is the transport layer protocol.
This is the source port number.
This is the source MAC address
This is the destination IP address.
This is the destination subnet mask address.
This is the destination port number.
This is the destination MAC address.
This is the WAN interface through which the traffic is routed.
Click the Edit icon to edit this policy.
Click the Delete icon to remove a policy from the Device. A window displays asking you to
confirm that you want to delete the policy.
DESCRIPTION
Enter a descriptive name of up to 8 printable English keyboard characters, not including
spaces.
Enter the source IP address.
SBG3500-N000 User's Guide
Advertisement
Table of Contents
Troubleshooting
