Table of Contents
Advertisement
Chapter 1 Introducing the SBG3500-N
• Change the password. Use a password that's not easy to guess and that consists of different
types of characters, such as numbers and letters. The password must have at least six
characters.
• Write down the password and put it in a safe place.
• Back up the configuration (and make sure you know how to restore it). Restoring an earlier
working configuration may be useful if the device becomes unstable or even crashes. If you
forget your password, you will have to reset the SBG3500-N to its factory default settings. If you
backed up an earlier configuration file, you would not have to totally re-configure the SBG3500-
N. You could simply restore your last configuration.
1.6 The RESET Button
If you forget your password or cannot access the web configurator, you will need to use the RESET
button at the front of the device to reload the factory-default configuration file. This means that you
will lose all configurations that you had previously and the password will be reset to "1234".
Make sure the POWER LED is on (not blinking).
1
To set the device back to the factory default settings, press the RESET button for ten seconds or
2
until the POWER LED begins to blink and then release it. When the POWER LED begins to blink,
the defaults have been restored and the device restarts.
24
SBG3500-N000 User's Guide
Advertisement
Table of Contents
Troubleshooting
