Table of Contents
Advertisement
• Select Built-in Ethernet from the Show list.
• Click the TCP/IP tab.
For dynamically assigned settings, select Using DHCP from the Configure list.
3
Figure 187 Macintosh OS X: Network
For statically assigned settings, do the following:
4
• From the Configure box, select Manually.
• Type your IP address in the IP Address box.
• Type your subnet mask in the Subnet mask box.
• Type the IP address of your Device in the Router address box.
Click Apply Now and close the window.
5
Turn on your Device and restart your computer (if prompted).
6
Verifying Settings
Check your TCP/IP properties in the Network window.
SBG3500-N000 User's Guide
Appendix A Setting up Your Computer's IP Address
351
Advertisement
Table of Contents
Troubleshooting
