Table of Contents
Advertisement
6.5.1 Edit 802.1X Settings
Use this screen to edit 802.1X authentication settings. Click the Edit icon next to the rule you want
to edit. The screen shown next appears.
Figure 27 802.1x: Add/Edit
The following table describes the labels in this screen.
Table 14 802.1x: Add/Edit
LABEL
Active
EAP Identity
EAP method
Enable
Bidirectional
Authentication
Certificate
Trusted CA
Apply
Cancel
6.6 The Ethernet WAN Screen
If you are using an ethernet WAN connection, you can configure a LAN port as an ethernet WAN
port. Click Network Setting > Broadband > Ethernet WAN to open this screen.
Note: LAN port 4 can operate as an Ethernet WAN port.
VMG1312-B10B / VMG1312-B30B Series User's Guide
DESCRIPTION
This field allows you to activate/deactivate the authentication.
Select this to enable the authentication. Clear this to disable this authentication without
having to delete the entry.
Enter the EAP identity of the authentication.
This is the EAP method used for this authentication.
Select this to allow bidirectional authentication.
Select the certificate you want to assign to the authentication. You need to import the
certificate in the Security > Certificates > Local Certificates screen.
Select the Trusted CA you want to assign to the authentication. You need to import the
certificate in the Security > Certificates > Trusted CA screen.
Click Apply to save your changes.
Click Cancel to exit this screen without saving.
Chapter 6 Broadband
93
Advertisement
Table of Contents
