Example #2: Show Mac-Address-Table Igmpsnooping; Example #3: Set Igmp (Global Config Mode); Example #4: Set Igmp (Interface Config Mode) - D-Link DWS-3000 Series Configuration Manual

Configuration Guide

Example #2: show mac-address-table igmpsnooping

(DWS-3024) #show mac-address-table igmpsnooping ?
<cr>
(DWS-3024) #show mac-address-table igmpsnooping
MAC Address
-----------------------
00:01:01:00:5E:00:01:16
00:01:01:00:5E:00:01:18
00:01:01:00:5E:37:96:D0
00:01:01:00:5E:7F:FF:FA
00:01:01:00:5E:7F:FF:FE

Example #3: set igmp (Global Config Mode)

(DWS-3026) (Config)#set igmp ?
<cr>
groupmembership-interval Configure IGMP Group Membership Interval
interfacemode
maxresponse
mcrtrexpiretime
(DWS-3026) (Config)#set igmp

Example #4: set igmp (Interface Config Mode)

(DWS-3026) (Config)#interface 0/2
(DWS-3026) (Interface 0/2)#set igmp ?
<cr>
fast-leave
interface
groupmembership-interval Configure IGMP Group Membership Interval
(secs).
maxresponse
mcrtrexpiretime
time on
mrouter
(DWS-3026) (Interface 0/2)#set igmp
50 © 2001- 2011 D-Link Corporation. All Rights Reserved.
Press Enter to execute the command.
Type Description
------- ------------
Dynamic Network Assist
Dynamic Network Assist
Dynamic Network Assist
Dynamic Network Assist
Dynamic Network Assist
Press enter to execute the command.
(secs).
Enable/Disable IGMP Snooping.
Configure IGMP Max Response time (secs).
Sets the Multicast Router Present Expiration
time on the system.
Press enter to execute the command.
Enable/Disable Fast-Leave on a selected
Configure IGMP Max Response time (secs).
Sets the Multicast Router Present Expiration
the system.
Configure Multicast Router port.
Interfaces
-----------
Fwd: 0/47
Fwd: 0/47
Fwd: 0/47
Fwd: 0/47
Fwd: 0/47