Figure 76. Set the User Login
Configuring RADIUS Fail-through on a Managed AP
This example configures a secondary Radius Server,and Radius fail-through feature in the
global profile for an AP managed by a DWS-3000 Switch. (This example assumes that a
primary RADIUS server has already been configured in the AP profile.)
Note that the same commands can be used in Network Profile mode to configure these
parameters on particular wireless network.
Using CLI Commands
config ap-profile
radius server bakcupone 11.11.11.11
radius server backuponesecret
radius failthrough
Using the Web Interface
The following Web screens show how to perform the configuration described in the example.
secret2
secret2
19
RADIUS Configuration Examples
RADIUS
131