Figure 84. Cos Configuration Example System Diagram - D-Link DWS-3000 Series Configuration Manual

Configuration Guide

Figure 84. CoS Configuration Example System Diagram

You will configure the ingress interface uniquely for all cos-queue and VLAN parameters.
configure
exit
You can also set traffic shaping parameters for the interface. If you wish to shape the egress
interface for a sustained maximum data rate of 80 Mbps (assuming a 100Mbps link speed),
you would add a simple configuration line expressing the shaping rate as a percentage of link
speed.
configure
exit
142 © 2001- 2011 D-Link Corporation. All Rights Reserved.
interface 0/10
classofservice trust dot1p
classofservice dot1p-mapping 6 3
vlan priority 2
exit
interface 0/8
cos-queue min-bandwidth 0 0 5 5 10 20 40 0
cos-queue strict 6
exit
interface 0/8
traffic-shape 80
exit
Port 0/10 Port 0/8
Server