D-Link DWL-8200AP Install Manual
Managed dualband access point
Hide thumbs
Also See for DWL-8200AP:
- Manual (129 pages) ,
- User manual (97 pages) ,
- Install manual (60 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for D-Link DWL-8200AP
Summary of Contents for D-Link DWL-8200AP
-
Page 2: System Requirements
System Requirements: Minimum System Requirements: • CD-ROM Drive • Computers with Windows, Macintosh, or Linux-based operating systems • Installed Ethernet Adapter Internet Explorer version 6.0 or Netscape Navigator version 7.0 and above. Package Contents DWL-8200AP Install Guide D-Link Systems, Inc. -
Page 3: Installing The Hardware
DWL-8200AP Install Guide Installing the Hardware Installing the Hardware Antennas Power Cord socket LAN 2 LAN 1 (PoE) Reset D-Link Systems, Inc. - Page 4 Step 1 Connect one end of an Ethernet cable (included with your package) to the LAN 1 (PoE) port on the DWL-8200AP, and the other end of the Ethernet cable to the port labeled P+DATA OUT on the PoE base unit.
- Page 5 DWL-8200AP Install Guide Open your Web browser and type http://192.168.0.50 into the URL address box. Then press the Enter or Return key. The logon pop-up screen will appear. admin Type for the username and leave the password field blank. Once you have logged in, the Home screen will appear.
- Page 6 The Setup Wizard Welcome Screen Follow the steps in order to configure the DWL-8200AP. Click Next Setup your new password You have the option to establish a password. Click Next Security level options for an No Security - continue to page 7 WEP - continue to page 8 ...
- Page 7 DWL-8200AP Install Guide 802.11a networks please do the following: Set Wireless LAN 802.11a Connection By default the DWL-8200AP SSID is set to default with a Channel setting of 52. Click Next No Security Select No Security for an Network. Click Next 802.11g...
- Page 8 The Setup Wizard Click Next Click Next WEP Encryption for 802.11a The DWL-8200AP is capable of three levels of encryption: 64-bit, 128-bit, and 152-bit (using only Hexadecimal). By default, encryption is disabled. You can change the encr yption settings for more secure wireless communication.
- Page 9 The Setup Wizard 802.11g networks please do the following: Set Wireless LAN 802.11g Connection By default the DWL-8200AP SSID is set to default with a Channel setting of 6. Click Next For 802.11g Network continue to page 12. D-Link Systems, Inc.
- Page 10 The Setup Wizard 802.11a networks please do the following: Set Wireless LAN 802.11a Connection By default the DWL-8200AP SSID is set to default with a Channel setting of 52. Click Next WPA-Personal Select WPA-Personal for an Network. Click Next 802.11a...
- Page 11 The Setup Wizard 802.11g networks please do the following: Set Wireless LAN 802.11g Connection By default the DWL-8200AP SSID is set to default with a Channel setting of 6. Click Next For 802.11g Network continue to page 12. D-Link Systems, Inc.
- Page 12 WPA-Personal - continue to page 14 No Security Select No Security for an Network. Click Next Click Restart Your Setup is complete! (continue to page 15) DWL-8200AP Install Guide 802.11g network are as follows: 802.11g D-Link Systems, Inc.
- Page 13 DWL-8200AP Install Guide The Setup Wizard Select WEP for an 802.11g Network. Click Next Click Next Click Restart D-Link Systems, Inc.
- Page 14 The Setup Wizard DWL-8200AP Install Guide WPA-Personal Select WPA-Personal for an 802.11g Network. Click Next Click Next Click Restart D-Link Systems, Inc.
- Page 15 DWL-8200AP Install Guide Your Setup is Complete! When you have completed the steps in this Quick Installation Guide, your connected network should look similar to this: * Maximum Wireless signal rate dervied from IEEE Standard 802.11a and 802.11g specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead lower actual data...