Configuration Guide
Figure 43. RIP Configuration
RIP Interface Configuration
Use the Interface Configuration page to enable and configure or to disable RIP on a specific
interface.
To display the page, click L3 Features > RIP > Interface Configuration in the navigation
tree.
Figure 44. RIP Interface Configuration
RIP Route Redistribution Configuration
Use the RIP Route Redistribution Configuration page to configure which routes are
redistributed to other routers using RIP. The allowable values for each fields are displayed next
to the field. If any invalid values are entered, an alert message is displayed with the list of all
the valid values.
To display the page, click L3 Features > RIP > Route Redistribution Configuration in the
navigation menu.
88
© 2001- 2011 D-Link Corporation. All Rights Reserved.