Example #2: Set Multicast Storm Control For All Interfaces; Example #3: Set Unicast Storm Control For All Interfaces - D-Link DWS-3000 Series Configuration Manual

Configuration Guide
<rate>
(DWS-3024) (Config)#storm-control broadcast all level 7
(DWS-3024) (Config)#exit
(DWS-3024)

Example #2: Set Multicast Storm Control for All Interfaces

(DWS-3024) #config
(DWS-3024) (Config)#storm-control multicast all ?
<cr>
level
(DWS-3024) (Config)#storm-control multicast all level 8
(DWS-3024) (Config)#exit
(DWS-3024) #

Example #3: Set Unicast Storm Control for All Interfaces

(DWS-3024) #config
(DWS-3024) (Config)#storm-control unicast all level 5
(DWS-3024) (Config)#exit
(DWS-3024) #
42 © 2001- 2011 D-Link Corporation. All Rights Reserved.
Enter the storm-control threshold as percent of port
speed.
Press Enter to execute the command.
Configure storm-control thresholds.