Port Description; Cli Example; Example #1: Enter A Description For A Port; Example #2: Show The Port Description - D-Link DWS-3000 Series Configuration Manual

Port Description

The Port Description feature lets you specify an alphanumeric interface identifier that can be
used for SNMP network management.

CLI Example

Use the commands shown below for the Port Description feature.

Example #1: Enter a Description for a Port

This example specifies the name "Test" for port 0/10:
config
interface 0/10
exit

Example #2: Show the Port Description

show port description 0/10
Interface.......0/10
ifIndex.........10
Description.....Test
MAC Address.....00:00:00:01:00:02
Bit Offset Val..10
description Test
exit
30
CLI Example 191