Configuration Guide
Figure 10
shows the example network.
Figure 10. LAG/Port-channel Example Network Diagram
Server
Subnet
3
Port 0/3
LAG_10
Port 0/2
LAG_10
Layer 3 Switch
Port 0/8
Port 0/9
LAG_20
LAG_20
Layer 2 Switch
Subnet 2
Subnet 3
Example 1: Create two port-channels:
(DWS-3024) #config
(DWS-3024) (Config)#port-channel lag_10
(DWS-3024) (Config)#port-channel lag_20
(DWS-3024) (Config)#exit
Use the show port-channel all command to show the logical interface ids you will use to
identify the port-channels in subsequent commands. Assume that lag_10 is assigned id 3/1 and
lag_20 is assigned id 3/2.
46
© 2001- 2011 D-Link Corporation. All Rights Reserved.