Filter; Mac Address Acl - D-Link DAP-3315 User Manual

Section 3 - Configuration
This page allows the user to configure Wireless MAC ACL settings
for access control.
Wireless Band: Displays the current wireless band rate.
Access Control Select Disable to disable the filters function.
List:
MAC Address: Select Accept to accept only those devices with
MAC addresses in the Access Control List. All
other devices not on the list will be rejected.
MAC Address Select Reject to reject the devices with MAC
List: addresses on the Access Control List. All other
devices not on the list will be accepted. Enter
each MAC address that you wish to include in
your filter list, and click Apply. When you enter
a MAC address, it appears in this list. Highlight
a MAC address and click Delete to remove it
from this list.
Current Client This table displays information about all the
Information:
current connected stations.
D-Link DAP-3315 User Manual

Filter

MAC Address ACL

40