Configuration Guide
Example #5: logging port configuration
(DWS-3024)
(DWS-3024) (Config)#logging ?
buffered
cli-command
console
host
syslog
(DWS-3024) (Config)#logging host ?
<hostaddress>
reconfigure
remove
(DWS-3024) (Config)#logging host 192.168.21.253 ?
<cr>
<port>
(DWS-3024) (Config)#logging host 192.168.21.253 4 ?
<cr>
<severitylevel>
(DWS-3024) (Config)#logging host 192.168.21.253 4 1 ?
<cr>
(DWS-3024) (Config)#logging host 192.168.21.253 4 1
(DWS-3024) (Config)#exit
(DWS-3024) #show logging hosts
Index
-----
-----------------
1
192.168.21.253
188
© 2001- 2011 D-Link Corporation. All Rights Reserved.
Buffered (In-Memory) Logging Configuration.
CLI Command Logging Configuration.
Console Logging Configuration.
Enter IP Address for Logging Host
Syslog Configuration.
Enter Logging Host IP Address
Logging Host Reconfiguration
Logging Host Removal
Press Enter to execute the command.
Enter Port ID from 0 to 65535
Press Enter to execute the command.
Enter Logging Severity Level (emergency|0, alert|1,
critical|2, error|3, warning|4, notice|5, info|6,
debug|7).
Press Enter to execute the command.
IP Address
Port
----
-------------
4
Active
#config
Status