Selecting Ptz Presets; Deleting Ptz Presets; Starting / Stopping Ptz Cruise - Lorex LHD200 Instruction Manual

Selecting PTZ Presets

1 In the No. field, select the number of the preset you would like to select.
2 Click Go to to go to the preset.

Deleting PTZ Presets

1 In the No. field, select the number of the preset you would like to delete.
2 Click Clear to delete the preset and click Save to save your changes.

Starting / Stopping PTZ Cruise

When PTZ cruise is enabled, the camera will cycle through saved presets. You must set and
save presets to use PTZ cruise.
To start / stop PTZ cruise:
1 Right-click to open the Menu Bar and click the Start Cruise button (
password. The camera will cycle through PTZ presets.
• To stop the PTZ cruise, right-click to open the Menu Bar and click the Stop Cruise button (
Enter the system password.
Appendix B: Connecting a PTZ Camera
). Enter the system
).
105