Basic Setup; Step 1: Connect The Hd-Sdi Cameras; Step 2: Connect The Mouse; Step 3: Connect The Ethernet Cable - Lorex LHD200 Instruction Manual

Basic Setup

Step 1: Connect the HD-SDI Cameras

• Connect the HD-SDI cameras to the HD SDI Video Input ports on the rear panel of the DVR.
For details, see "Connecting Cameras" on page 9.
8-channel model shown
NOTE: Make sure to include some slack in the extension cable on both ends when connecting
cameras to the DVR. Strip lines may appear in the image if the cable is too tight.

Step 2: Connect the Mouse

• Connect a USB mouse (included) to one of the USB ports.
8-channel model shown

Step 3: Connect the Ethernet Cable

• Connect an ethernet cable (included) to the LAN port on the rear panel of the DVR. Connect
the other end of the ethernet cable to a router on your network.
8-channel model shown
Push and twist the BNC connector clockwise
to secure it to the BNC port.
USB port
LAN port
Connect ethernet cable
5