Configuring Hard Drive Recording Mode; Configuring Ptz Parameters - Lorex LHD200 Instruction Manual

• Record Channel: Select the channels that the system should record during an alarm trigger.
3 Click Save to apply your settings.

Configuring Hard Drive Recording Mode

To configure the hard drive recording mode:
1 Click the Remote Setting tab, and click Device>HDD.
2 In the Overwrite drop-down menu, select Auto to enable overwrite mode. When overwrite is
enabled, the system deletes the oldest footage (first in, first out) when the hard drive is full.

You can also select a desired amount of days the system should retain data. For example, if
you select 30 days, the hard drive will begin to overwrite itself after 30 days. Note that your
hard drive must be large enough to store video for the selected duration.
3 Click Save to apply your settings.

Configuring PTZ Parameters

The system is capable of controlling PTZ cameras (not included) that are connected to the
system. Please note that you will need PTZ information from the PTZ camera
manufacturer's users guide. For details on connecting a PTZ camera to your system, see
"Appendix B: Connecting a PTZ Camera" on page 102.
Overwrite drop-down menu
Using the PC/Mac Client Software
73