Ptz Presets And Ptz Cruise; Setting Ptz Presets - Lorex LHD200 Instruction Manual

Appendix B: Connecting a PTZ Camera
3 Use the on-screen PTZ controls to control the camera.
Channel: 
Select the channel the PTZ
camera connects to.
Direction keys: 
Click to pan and tilt the camera

PTZ Presets and PTZ Cruise

You can set preset positions for your PTZ cameras. You can also use PTZ cruise to have the
camera automatically cycle through presets.

Setting PTZ Presets

1 Using the PTZ controls, move the camera into position.
2 (Optional) In the Time field, select the number of seconds the camera will remain in that
position during PTZ cruise before going to the next position.
3 Click Set to set the preset. The Total and No. field will automatically increase. The Total field
shows you the total number of created presets, and the No. field shows you the number of the
preset you are currently creating.
Total Number
of presets
Preset number
Time shown
before changing
4 Complete the steps above to create additional presets as needed. Press Save when you are
finished to save all created presets.
104
Speed Slider:
Increase or decrease the pan and tilt
speed
Click the + and - symbols to
adjust the camera Zoom,
Focus and Iris settings
Save Presets
Clear Preset
Camera Pre-set
controls
Go To Preset
Set Preset