Lorex LHD200 Instruction Manual page 53

2 Under View Setup, select Enable. This lets
you select and arrange the channels you
want to show on the screen.
NOTE: Enabling View Setup disables your
ability to change channels the
normal way. You will need to disable
View Setup to return to normal
operation.
Select display mode
3 Under View Mode, select the desired
viewing mode: Single, Quad, or Nine.
4 Click Vout Setup. A menu appears that
allows you to select the arrangement of
channels.
Select Enable
Click Vout Setup
5 Click the drop-down menus to select
which channels to show on the screen and
the arrangement of channels.
Select the arrangement of channels on screen
6 Click Apply to save changes. Click Ok.
Right-click repeatedly to exit all menus
and return to live viewing.
Using the Main Menu
37