Lorex LHD200 Instruction Manual page 125

the hard drive to the bracket. Place the hard drive and bracket back in the DVR with the power
and data connectors facing the middle and replace the hard drive bracket screws.
• If installing a 2.5" hard drive, place the hard drive over one of the two sets of screw holes with
the power and data connectors facing the center of the DVR. Hold the hard drive in place and
carefully turn the DVR over. Insert 4 hard drive screws to secure the hard drive. Turn the DVR
back over.
Remove hard drive bracket
Place the hard drive over the screw holes
with the power and data connectors facing
the center of the DVR
Appendix D: Replacing the Hard Drive
Insert the hard drive screws
Replace hard drive bracket
Make sure to hold the hard
drive in place while
removing the hard drive
screws and turning the DVR
to avoid damaging the DVR.
Remove the hard drive screws
109