Recording; Event Recording; Recording Audio - Lorex LHD200 Instruction Manual

Recording

By default, the system is set to immediately record video from connected cameras in
Continuous Recording Mode.
C
• Recording—Continuous: Normal, continuous recording
.
You can set the system to stop recording once the hard drive is full, or to continually record
by overwriting previously recorded data. For more details, see "Configuring Hard Drive
settings" on page 46.

Event Recording

The system also includes motion recording:
M
• Recording—Motion: The system records when motion is detected by the camera

Recording Audio

The system can also record audio for up to 4 channels (4-channel model) or 8 channels
(8-channel models). You must have audio-capable cameras (not included) or self-powered
microphones (not included) in order to record audio on the system.
For details, see "Appendix C: Recording Audio" on page 106.
Recording
21