Step 2 Of 3: Obtain The Dvr's Local Ip Address; Step 3 Of 3: Connect To The Dvr's Local Ip Address; To Connect Using The Dvr's Local Ip Address On A Pc - Lorex LHD200 Instruction Manual

Appendix E: DDNS Setup (Advanced)
3 Turn the power switch to I to power the DVR back on.
8-channel model shown
INTERNET
(not required for
local viewing)

Step 2 of 3: Obtain the DVR's Local IP Address

1 Press the PTZ/
window. If prompted, enter the system user name (default: admin) and password (default:
000000).
2 Write down the IP Address number of the DVR.
• A local IP looks something like this: 192.168.5.118. Note that single digit numbers appear as
three digits. For example, "005" is the same as "5".

Step 3 of 3: Connect to the DVR's Local IP Address

Follow the steps below to confirm connectivity over a local network on a PC or Mac.

To connect using the DVR's local IP address on a PC:

1 Insert the software CD that comes included with the system. Open the CD and click DVR
Software>Lorex Client Software - PC. Follow the on-screen instructions to install.
• OR, download the Client Software for PC from www.lorextechnology.com.
112
ROUTER
(Not Included)
button on the front panel of the DVR to open the System Information
Ethernet Cable (included)
DVR IP address
COMPUTER
(Not Included)