.
Table 2-7.
Signal Characteristics
A[35:3]#, ADS#, ADSTB[1:0]#, BNR#, BPRI#,
D[63:0]#, DBI[3:0]#, DBSY#, DEFER#,
DRDY#, DSTBN[3:0]#, DSTBP[3:0]#, HIT#,
HITM#, LOCK#, PROCHOT#, REQ[4:0]#,
RS[2:0]#, TRDY#
THERMTRIP#, FERR#/PBE#, IERR#, BPM[5:0]#,
BPMb[3:0]#, BR0#, TDO, TDO_M, FCx
NOTES:
1.
Signals that do not have R
Table 2-8.
Signal Reference Voltages
BPM[5:0]#, BPMb[3:0]#, RESET#, BNR#, HIT#,
HITM#, BR0#, A[35:0]#, ADS#, ADSTB[1:0]#,
BPRI#, D[63:0]#, DBI[3:0]#, DBSY#, DEFER#,
DRDY#, DSTBN[3:0]#, DSTBP[3:0]#, LOCK#,
REQ[4:0]#, RS[2:0]#, TRDY#
NOTE:
1.
See
2.8.2
CMOS and Open Drain Signals
Legacy input signals such as A20M#, IGNNE#, INIT#, SMI#, and STPCLK# use CMOS
input buffers. All of the CMOS and Open Drain signals are required to be asserted/
deasserted for at least eight BCLKs in order for the processor to recognize the proper
signal state. See
timing requirements for entering and leaving the low power states.
2.8.3
Processor DC Specifications
The processor DC specifications in this section are defined at the processor core (pads)
unless otherwise stated. All specifications apply to all frequencies and cache sizes
unless otherwise stated.
Table 2-9.
GTL+ Signal Group DC Specifications
Symbol
V
IL
V
IH
V
OH
I
OL
24
Signals with R
TT
1
Open Drain Signals
, nor are actively driven to their high-voltage level.
TT
GTLREF
Table 2-10
for more information.
Section 2.8.3
for the DC specifications. See
Parameter
Input Low Voltage
Input High Voltage
GTLREF + 0.10
Output High Voltage
V
Output Low Current
Signals with No R
A20M#, BCLK[1:0], BSEL[2:0],
COMP[8,3:0], FERR#/PBE#, IERR#, IGNNE#,
INIT#, ITP_CLK[1:0], LINT0/INTR, LINT1/
NMI, MSID[1:0], PWRGOOD, RESET#, SMI#,
STPCLK#, TDO, TDO_M,
TESTHI[13,11:10,7:0], THERMTRIP#,
VID[6:0], GTLREF[3:0], TCK, TDI, TDI_M,
TMS, TRST#, VTT_SEL
A20M#, LINT0/INTR, LINT1/NMI,
IGNNE#, INIT#, PROCHOT#,
PWRGOOD
1
TDI
, TDI_M
Min
Max
-0.10
GTLREF - 0.10
V
+ 0.10
TT
- 0.10
V
TT
V
TT_MAX
N/A
[(R
) + (2 * R
TT_MIN
Electrical Specifications
TT
V
/2
TT
1
1
, SMI#, STPCLK#, TCK
1
1
1
, TMS
, TRST#
Section 6.2
for additional
Unit
Notes
V
2, 6
V
3, 4, 6
V
4, 6
TT
/
A
)]
ON_MIN
Datasheet
,
1
-