Honeywell SMV 3000 User Manual page 121

9.5 Replacing Meter Body Center Section,
Procedure, continued
Table 29
1/99
Replacing Meter Body Center Section, Continued
Step
4 Remove nuts from bolts that hold process heads to center section.
Remove process heads and bolts
5 Remove O-ring and clean interior of process head using soft bristle
brush and suitable solvent.
6 Replace O-ring.
7 Coat threads on process head bolts with anti-seize compound such
as "Neverseize" or equivalent.
Carefully assemble process heads and bolts to new center section.
8
Finger tighten nuts.
Nuts
Process
head
SMV 3000 Transmitter User's Manual
Continued
Action
Flex-Tape Assembly
O-ring
O-ring
Center
section
Process
head
Bolts
22370
Continued on next page
109