Honeywell SMV 3000 User Manual page 3

This manual is intended as a detailed "how to" reference for installing, piping, wiring, configuring,
starting up, operating, maintaining, calibrating, and servicing Honeywell's SMV 3000 Smart
Multivariable Transmitter. It is based on using the SCT 3000 Smartline Configuration Toolkit
software version 2.0 or greater as the operator interface.
While this manual provides detailed procedures to assist first time users, it also includes
summaries for most procedures as a quick reference for experienced users.
If you will be digitally integrating the SMV 3000 transmitter with our TPS/TDC 3000 control
system, we recommend that you use the PM/APM Smartline Transmitter Integration Manual
supplied with the TDC 3000 X bookset as the main reference manual and supplement it with
detailed transmitter information in Appendix A of this manual.
Note that this manual does not include detailed transmitter specifications. A detailed Specification
Sheet is available separately or as part of the Specifier's Guide which covers all Smartline
transmitter models.
Conventions and Symbol Definitions
The following naming conventions and symbols are used throughout this manual to alert users of
potential hazards and unusual operating conditions:
ATTENTION
CAUTION
WARNING
1/99
About This Publication
ATTENTION indicates important information, actions or procedures that
may indirectly affect operation or lead to an unexpected transmitter
response.
CAUTION indicates actions or procedures which, if not performed
correctly, may lead to faulty operation or damage to the transmitter.
WARNING indicates actions or procedures which, if not performed
correctly, may lead to personal injury or present a safety hazard.
ElectroStatic Discharge (ESD) hazard. Observe precautions for handling
electrostatic sensitive devices.
Protective Earth terminal. Provided for connection of the protective earth
(green or green/yellow) supply system conductor.
SMV 3000 Transmitter User's Manual iii