Honeywell SMV 3000 User Manual page 130

10.5 Resetting Calibration,
Background
Procedure
118
You can erase incorrect calibration data for a given PV measurement
range by resetting the data to default values using the SCT or SFC.
Depending if you are using the SCT 3000 or the SFC to reset calibration,
refer to the appropriate sections below for the procedure. The procedure
shows you how to reset calibration data for a given PV measurement range
in a transmitter.
Using the SCT, select the topic:
"Resetting Calibration for an SMV 3000 Transmitter"
Using the SFC:
Follow the procedure for "Steps to Reset Calibration
Data for an SMV 3000" in Section 7 of the SFC
Operating Guide.
SMV 3000 Transmitter User's Manual
Continued
1/99