Snmp; Upnp - D-Link GO-DSL-N150 User Manual

The following table describes the parameters and buttons of this page:
Field
Active
URL Index
URL

3.6.3 SNMP

Choose Access Management > SNMP, and the page shown in the following
figure appears. Simple Network Management Protocol is used for exchanging
information between network devices.
The following table describes the parameters and buttons of this page:
Field
Get Community
Set Community

3.6.4 UPnP

Choose Access Management > UPnP, the page shown in the following figure
appears. This page is used to configure the upnp parameters.
UPnP (Universal Plug and Play) is a distributed, open networking standard that
uses TCP/IP for simple peer-to-peer network connectivity between devices. An
Make URL Filter rule activated or deactivated.
Can set an URL Filter Index from 1 to 16.
Enter the URL that needs to be filtered.
Select to set the password for incoming Get requests
from the management station.
Select to set the password for incoming Set requests
from the management station.
47
GO-DSL-N150
Description
Description
User Manual